![]() ![]() It will be live and you can ask any questions to our CTO, Miguel Calvo. We’re hosting a free tech demo on February 7. Reliable bed tilt compensation (no more thumbscrews) 2.4 and 5 GHz Wi-Fi A 1080p camera (mounted higher for a better view) Compatibility with 280+ Marketplace materials Compatibility with S5 project files (no reslicing needed) And a whole lot more The UltiMaker S7 also includes quality of life improvements: We also reversed the front fan direction (fewer plastic hairs, less maintenance), made the print core door magnets stronger, and add a sensor that helps avoid flooding. This effectively makes it much harder to not achieve a perfect first layer, improving overall print success. The re-engineered print head has an inductive sensor which reduces noise when probing the build plate. Along with that, 4 pins and 25 magnets make it easy to replace the flex plate perfectly – even with one hand. But we also don’t recommend using or adhesion structures for UltiMaker materials (except PC, ’s PC). Not only do you not need tools to pop a printed part off. A PEI-coated flexible steel build plate makes a big difference to productivity. The build stack has also been completely redesigned. the authors in a previous work was D10 22 m, D50 34 m, and D90 42 m 22. Ultimaker 3 high temperature core by Solex 3D provides capability to change. To further enclose the build chamber the S7 only has one magnetically latched door. a) Image showing multiple connected Ni-Cr negative CTE structures. This filters the exhaust air of every print and also improves build temperature stability. It now includes an integrated Air Manager. The UltiMaker S7 is built on the success of the UltiMaker S5 and its design decisions were heavily based on feedback from customers. But honestly, I am getting perfect results even on fairly complex prints.Īre you saying you didn't adjust the feeder tension? However, they might be happening without me noticing, so maybe you should refrain from that from big high-quality prints. With right settings I have no "feeder slips". Same feeder, same PTFE tube, same print cores. Do yourself a favor and watch first 2-3 layers.Ħ. Fixed an issue when the software crashes when installing to a drive other than C (Windows). In CURA, feeding rate set to 265% (which is, of course, diameter ratio squared).ĥ. This will help the spool roll, further reducing the required feeding force.Ĥ. stl file is then imported to Ultimaker Cura for the g-codes conver. Use better filament holder, with thin axis and a silicon lube spray will not hurt. 10 Laser Polishing of Wire Arc Additive Manufactured SS316L. ![]() (this is because you really want slower feeding). On 0.8 head I allow myself to go higher (up to 0.4). Layer height no more than 0.1mm on 0.4 head. Temperature 215. (this is becuase the feeder has weaker grip on the filament. Folks, I am getting good results by putting 1.75 into UM3 "as is" (no changes to the machine). ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |